Gasification workshop master Li Xiaogang

　　Brief introduction of deeds

　　Li Xiaogang，In July 2013, it entered the gasification workshop of Ningxia Hexing Chemical Co., LTD，Participated in the gasification plant construction, production preparation and test the whole process，Through their own efforts，Delve into，From a gasification site operator gradually grow into a gasification central control operator，And won the 2018 company technical expert。

　　December 18, 2019 At 11:13, the gasification furnace A was running, and suddenly the oxygen regulating valve FV-2005B valve position of the gasification furnace B was displayed as 0.1%, Li Xiaogang, who is monitoring the disk at this time, found that he quickly determined that the output signal of the regulator FV-2005B was lost through other operating parameters, and the actual valve position of the regulator did not change。He immediately reported to the workshop director Liu Xiangtao who was in the main control room, Liu Xiangtao immediately suspended the operation of furnace A, and after the instrument personnel completed the processing of FV-2005B, at 12:15, the gasification furnace A was successfully put into operation。After the professional inspection of the instrument, the problem found is A DCS systemic hidden danger, due to the timely discovery and correct disposal, to prevent the possible fluctuation of the oxygen flow in furnace B after the feeding of furnace A, but also to prevent the system risk caused by the failure of the valve to adjust normally in emergency situations, to ensure the safe operation of the device。

　　As an old employee who experienced the original driving of the device, he has a wealth of operational experience。By virtue of his meticulous and rigorous work style and professional operation quality, he found the abnormal working conditions in time, which provided a strong support for the subsequent safe and effective treatment of production hazards and ensured the safety of production equipment!The risk of device parking is eliminated!